SAVINGS ON PRODUCT TO GALVANIZING

In some particular cases, it may be necessary to mask the galvanization of certain areas of parts such as threads, tapped holes, blind holes … that is to say prevent the zinc is deposited in these places, to avoid a complementary operation removal of the coating after galvanizing. Several solutions exist (special paints, adhesive tapes, lubricating pastes …) whose choice is to be determined according to the type of part and, in any case, in close collaboration with the galvanizer to ensure the effectiveness of the treatment.
Without claiming to be exhaustive, we give below a list of products that can be used to perform this operation:

WABIEDUR Painting

Rotbraun réf 923.502
Available at :
Adolf WAGNER
Postfach 1563
35205 BIEDENKOPF
Germany

Tél. : +49 64 61 95 120

Fax. : +49 64 61 95 1233

GALVA PROTECT METAFLUX Paint

Reference 70-38.

Available at :
SODITEC
24 rue Joseph Marie Jacquard
67400 Illkirch-Graffenstaden
BP 220 – 67406 Illkirch Cedex
Tél. : 03 88 55 29 40
Fax. : 03 88 67 85 40

Nickel solder paste Nickel LUBRICOMET® AS 767

Resistant high temperature.
Fits well in blind hole with a screw, screwed before treatment and easily unscrewable after galvanizing.

LOCTITE FRANCE
10 avenue Eugène Gazeau – BP 90
60304 SENLIS cedex
Tél. : 03 44 21 66 00
Fax. : 03 44 53 49 58

CLISS lubricating paste

To protect the threads, coat a Cliss screw, screw it into the tapping to be protected, unscrewing will be done effortlessly after galvanizing.

Ets BENEDETTO
4 rue Albert Thomas
69150 DECINES-CHARPIEU
Tél. : 04 78 49 06 08
fax. : 04 78 49 88 99

 

 

 

ISOBLANC Paste

For thread protection, apply after fluxing.
SERVIMETAL
235 avenue d’Alsace-Lorraine
73008 CHAMBERY cedex
Tél. : 04 79 96 23 28
Fax. : 04 79 62 66 76

Adhesive tape 3 M KAPTON

Référence 5413.
For the protection of threads and shoulders.
3 M FRANCE
Boulevard de l’Oise
95006 CERGY PONTOISE cedex
Tél. : 01 30 31 61 61
Fax. : 01 30 31 75 46

Source : Galvazinc, epargnes.doc, 08/11/2013

GALVA UNION

 

GALVA UNION is the specialist of galvanization, powder coating and duplex treatment.