| Accès client |
Membre du groupe Galva Union
Z.I. du Pont Panay – B.P. 34
03500 ST-Pourçain-sur-Sioule
Tel : (33) 04 70 45 72 73
Fax : (33) 04 70 45 93 29
Email : decogalva@galvaunion.com
Site : www.galvaunion.com
DECOZINC powder coating after metallization
| SPECIFICATION SHEET N°2 STANDARD SPECIFICATION FOR A COATING CONSISTING OF: • ANTICORROSION TREATMENT BY METALLIZATION • DECOZINC FINISHING WITH POLYESTER POWDER COATING (This procedure is particularly suited to metal articles that cannot undergo galvanization or cataphoresis) |
| SURFACE TREATMENT OF STEEL CONSISTS OF: |
| A – Anticorrosion treatment by
metallization
The ISO 9001 certified company will carry out: 1- On degreased steel, a Sa 2.5 sanding in compliance with ISO 12-944-4 2- The application of a metallization in compliance with NFP 24-351 3- A finishing process The metallization process must be the subject of a Quality Assurance scheme |
| B – Powder coating finish The company will carry out the following operations: 1- Degreasing + chemical stripping 2- Conversion coating 4- Electrostatic application of an architectural grade thermosetting powder 5- Polymerization 180/200°C 6- Checks 7- Packaging The process must be the subject of a Quality Assurance scheme. The articles must be free of pin holing. |
| C – A procedure that incorporates traceability The powder coating procedure must be able to be checked a posteriori. Traceability should include at the least a sample plate and a summary of the main production parameters. |
| D – The delivery of a guarantee The anticorrosion + powder coating combination must be guaranteed by an Anticorrosion and Adhesion insurance. (Certificate of Insurance to be supplied) - Anticorrosion Guarantee required : 10 years without reaching Re 3 on the European Rust Scale - Resistance/Adhesion Guarantee required: 10 years (7 + 3 years format) with an intervention threshold of 5% |
| E – Compliance with regulations Procedures must: Comply with NFP 24-351 Be carried out by a “Thermolacier” certified company Comply with suppliers' recommendations for products used |
15/09/2005 |